322313: 焊工（甲等）WELDER (FIRST CLASS) SKILL LEVEL 3
| MLTSSL |
Medium and Long-term Strategic Skills List |
 |
| STSOL |
Short-term Skilled Occupation List |
 |
| ROL |
Regional Occupation List |
 |
Assessing Authority: TRA
| State |
Capital |
Visa subclass 190 |
Visa subclass 491 |
| ACT |
Australian Capital Territory |
Canberra |
Yes |
Yes |
| NSW |
New South Wales |
Sydney |
Yes |
Yes |
| NT |
Northern Territory |
Darwin |
Yes |
Yes |
| QLD |
Queensland(Offshore list)
|
Brisbane |
|
Yes |
| SA |
South Australia |
Adelaide |
Yes |
Yes |
| TAS |
Tasmania (Category 1) |
Hobart |
Yes |
Yes |
| VIC |
Victoria |
Melbourne |
Yes |
Yes |
| WA |
Western Australia
(General stream)
|
Perth |
|
|
Yes： 有資格Occupation may be Eligible
Yes：補充技術清單或特殊情況適用的職業 Occupation in the "Supplementary Skilled List" or "Special Conditions Apply"
Yes：職業不在"State Occupation List"或職業狀態為“Closed”，但若滿足條件仍有機會申請
？：點擊州擔保詳情查看詳情
322313 焊工（甲等）職業描述 Job description
焊工（甲等）使用各種焊接技術制造并維修金屬產品。Fabricates and repairs metal products using various welding techniques. Previously referred to in ASCO as: 4122-15 Welder (First Class).
322313 焊工（甲等）技術等級 Skill level
焊工（甲等）的技能等級為3（ANZSCO Skill Level 3）
322313 焊工（甲等）所屬職業列表
澳洲MLTSSL職業列表 Medium and Long-term Strategic Skills List
322313 焊工（甲等）澳洲技術移民職業評估 Skills assessment authority
TRA - 澳大利亞職業技術認證中心 Trades Recognition Australia：大陸技術移民申請的絕大部分職業都是通過該類別評估。 TRA移民技術評估類別申請的條件為具有澳洲要提名職業相對等的資格（一般是AQFIII，IV或 Diploma），至少3年的全職提名職業作經驗，近2年內至少1年全職帶薪提名職業工作經驗。對于在獲得等同AQF相關資質之前的工作要獲得認可的話，需之前至少5年提名職業或者提名職業相關全職工作經驗。
相關職業
322311 金屬構造工 Metal Fabricator
322312 壓力焊工 Pressure Welder
3223 結構鋼焊接技工
ANZSCO 3223 結構鋼焊接技工職責概述
• 結構鋼焊接技工切割、定型、并修理鋼鐵結構的金屬部件、鍋爐、壓力容器及管道、船舶和其他容器。 STRUCTURAL STEEL AND WELDING TRADES WORKERS cut, shape, join and repair metal components of iron and steel structures, boilers, pressure vessels and pipes, ships and other vessels.
ANZSCO 3223 結構鋼焊接技工技能要求 Indicative Skill Level
• 本職業需要如下條件：Most occupations in this minor group have a level of skill commensurate with the qualifications and experience outlined below.
• 在澳大利亞： In Australia:
• AQF3級證書加2年以上在職培訓或AQF4級證書（ANZSCO 3級水平）。 AQF Certificate III including at least two years of on-the-job training, or AQF Certificate IV (ANZSCO Skill Level 3)
• 在新西蘭： In New Zealand:
• NZ4級注冊證書（ANZSCO 3級水平）。NZ Register Level 4 qualification (ANZSCO Skill Level 3)
• 三年以上相關經驗可以代替上方所示正規資格。某些情況下，除了要求有正規資格還要求有相關經驗和/或在職培訓經歷。需要注冊或許可證。 At least three years of relevant experience may substitute for the formal qualifications listed above. In some instances relevant experience and/or on-the-job training may be required in addition to the formal qualification. Registration or licensing may be required.
ANZSCO 3223 結構鋼焊接技工主要職責 Tasks Include
• 研究圖紙和說明書，以確定工作職責 studying blueprints, drawings and specifications to determine job requirements
• 篩選、清潔并準備金屬原料 selecting, cleaning and preparing metal stock
• 使用手動工具、氣體切割機和金屬切割機切割標記的金屬型材 cutting marked-out metal sections and shapes using hand tools, flame cutting torches and metal cutting machines
• 用手工和機械工具，并通過加熱和錘擊的方塑造使金屬型材和彎曲鋼管 shaping and bending metal sections and pipes using hand and machine tools, and by heating and hammering
• 使用手工工具和測量儀器對零件的連接進行校準 aligning parts to be joined using hand tools and measuring instruments
• 使用各種焊接技術，用鉚釘、螺旋等放法連接部件 joining metal sections using various welding techniques, bolting and riveting
• 檢查焊縫寬度、滲透和精密度 examining welds for width of bead, penetration and precision
• 用清洗、拋光整理、銼削、打磨和酸性溶液清潔，對產品進行精加工 finishing products by cleaning, polishing, filing and bathing in acidic solutions
• 通過鑿邊、鑿切和磨削以平滑焊縫 cleaning and smoothing welds by filing, chiselling and grinding
400-622-8284
zixun@feac.cn
